Your life would be very empty if you had nothing to regret.
Home improvement page added to the Project Index
Click “This Old House” under the Art/Design category in the Project Index to see some pictures!
Click “This Old House” under the Art/Design category in the Project Index to see some pictures!
No problem! Just post it here when you can.
I know that without SASL i can’t use autoresponse mail configuration. But i can use the shell configuration.
I’m sorry but now i can’t stop postfix service. I can try tomorrow and then i send you snippet of my mail log.
Thank you very much!! Bye
Actually, you should be able to use autoresponse without SASL—you just won’t be able to set autoresponses via e-mail. Can you send me a snippet of your mail log with autoresponse installed?
Ah, it looks as though you aren’t using SASL for authentication. Currently, autoresponse only works if you are using SASL.
I don’t know if this is usefull…
This is working maillog (without autoresponse)
If you wont i can send you also postfix conf file.. (main.cf and master.cf)if possible, i hope by e-mail.
Thanks!!
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
lbox.db is older than source file /etc/postfix/vmailbox
Jul 5 04:30:36 NEWMAIL postfix/smtpd[2022]: connect from sqlcdc[172.16.10.10]
Jul 5 04:30:36 NEWMAIL postfix/smtpd[2024]: warning: database /etc/postfix/vmailbox.db is older than source file /etc/postfix/vmailbox
Jul 5 04:30:36 NEWMAIL postfix/smtpd[2024]: connect from sqlcdc[172.16.10.10]
Jul 5 04:30:36 NEWMAIL postfix/smtpd[2025]: warning: database /etc/postfix/vmailbox.db is older than source file /etc/postfix/vmailbox
Jul 5 04:30:36 NEWMAIL postfix/smtpd[2025]: connect from sqlcdc[172.16.10.10]
Jul 5 04:30:36 NEWMAIL postfix/smtpd[2017]: NOQUEUE: reject: RCPT from sqlcdc[172.16.10.10]: 450 4.1.8 : Sender address rejected: Domain not found; from= to= proto=SMTP helo=
Jul 7 17:19:44 NEWMAIL clamsmtpd: 100171: accepted connection from: 127.0.0.1
Jul 7 17:19:44 NEWMAIL postfix/smtpd[12757]: disconnect from newmail[127.0.0.1]
Jul 7 17:19:44 NEWMAIL postfix/smtpd[11764]: connect from newmail[127.0.0.1]
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 resp=
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd-file(sara.bettarello,127.0.0.1): lookup: user=sara.bettarello file=/etc/postfix/passdb.dovecot
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): client out: OK 1 user=sara.bettarello
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): master in: REQUEST 3111 12858 1
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd(sara.bettarello,127.0.0.1): lookup
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd(sara.bettarello,127.0.0.1): unknown user
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd-file(sara.bettarello,127.0.0.1): lookup: user=sara.bettarello file=/etc/postfix/passdb.dovecot
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): master out: USER 3111 sara.bettarello uid=100 gid=102 home=/home/vmail
Jul 7 17:19:44 NEWMAIL dovecot: imap-login: Login: user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jul 7 17:19:44 NEWMAIL postfix/smtpd[11764]: 429DA2A20037: client=newmail[127.0.0.1]
Jul 7 17:19:44 NEWMAIL postfix/cleanup[12555]: 429DA2A20037: message-id=
Jul 7 17:19:44 NEWMAIL postfix/qmgr[3303]: 429DA2A20037: from=, size=1811, nrcpt=1 (queue active)
Jul 7 17:19:44 NEWMAIL postfix/smtp[12741]: 15C1E2A20034: to=, relay=127.0.0.1[127.0.0.1]:10025, delay=0.4, delays=0.14/0/0.04/0.22, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 429DA2A20037)
Jul 7 17:19:44 NEWMAIL postfix/qmgr[3303]: 15C1E2A20034: removed
Jul 7 17:19:44 NEWMAIL clamsmtpd: 100171: from=sara.bettarello@centrodiagnosticocernaia.it, to=csiamf@tin.it, status=CLEAN
Jul 7 17:19:44 NEWMAIL postfix/smtpd[11764]: disconnect from newmail[127.0.0.1]
Jul 7 17:19:44 NEWMAIL dovecot: IMAP(sara.bettarello): Disconnected: Logged out
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 resp=
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd-file(sara.bettarello,127.0.0.1): lookup: user=sara.bettarello file=/etc/postfix/passdb.dovecot
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): client out: OK 1 user=sara.bettarello
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): master in: REQUEST 3112 12866 1
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd(sara.bettarello,127.0.0.1): lookup
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd(sara.bettarello,127.0.0.1): unknown user
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): passwd-file(sara.bettarello,127.0.0.1): lookup: user=sara.bettarello file=/etc/postfix/passdb.dovecot
Jul 7 17:19:44 NEWMAIL dovecot: auth(default): master out: USER 3112 sara.bettarello uid=100 gid=102 home=/home/vmail
Jul 7 17:19:44 NEWMAIL dovecot: imap-login: Login: user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jul 7 17:19:44 NEWMAIL postfix/smtp[12670]: 429DA2A20037: to=, relay=smtp.tin.it[62.211.72.32]:25, delay=0.66, delays=0.22/0/0.23/0.21, dsn=2.0.0, status=sent (250 Mail accepted)
Jul 7 17:19:44 NEWMAIL postfix/qmgr[3303]: 429DA2A20037: removed
Jul 7 17:19:45 NEWMAIL dovecot: IMAP(sara.bettarello): Disconnected: Logged out
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 resp=
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): passwd-file(sara.bettarello,127.0.0.1): lookup: user=sara.bettarello file=/etc/postfix/passdb.dovecot
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): client out: OK 1 user=sara.bettarello
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): master in: REQUEST 3113 12868 1
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): passwd(sara.bettarello,127.0.0.1): lookup
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): passwd(sara.bettarello,127.0.0.1): unknown user
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): passwd-file(sara.bettarello,127.0.0.1): lookup: user=sara.bettarello file=/etc/postfix/passdb.dovecot
Jul 7 17:19:47 NEWMAIL dovecot: auth(default): master out: USER 3113 sara.bettarello uid=100 gid=102 home=/home/vmail
Jul 7 17:19:47 NEWMAIL dovecot: imap-login: Login: user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jul 7 17:19:47 NEWMAIL dovecot: IMAP(sara.bettarello): Disconnected: Logged out
Jul 7 17:19:56 NEWMAIL dovecot: IMAP(tacrmn): Disconnected: Logged out
Jul 7 17:19:56 NEWMAIL dovecot: IMAP(massimo.braghetto): Disconnected: Logged out
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=172.16.10.4 rip=172.16.100.68
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): client out: CONT 1
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): client in: CONT
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): passwd-file(livia.reviezzo,172.16.100.68): lookup: user=livia.reviezzo file=/etc/postfix/passdb.dovecot
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): client out: OK 1 user=livia.reviezzo
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): master in: REQUEST 3114 12871 1
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): passwd(livia.reviezzo,172.16.100.68): lookup
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): passwd(livia.reviezzo,172.16.100.68): unknown user
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): passwd-file(livia.reviezzo,172.16.100.68): lookup: user=livia.reviezzo file=/etc/postfix/passdb.dovecot
Jul 7 17:20:28 NEWMAIL dovecot: auth(default): master out: USER 3114 livia.reviezzo uid=100 gid=102 home=/home/vmail
Jul 7 17:20:28 NEWMAIL dovecot: imap-login: Login: user=, method=PLAIN, rip=172.16.100.68, lip=172.16.10.4
That shouldn’t be a problem—autoresponse will work regardless of whether or not you are using mysql or vmail on the backend. Can you post a snippet of your mail log? I’ll help you get this working, but I’m going to need more info. Thanks!
First of all, Thanks for the reply.
My mailserver don’t using mysql for User e Domains, but is file based. (vmailbox)
I don’t know if this can be a problem.
I reinstallad autoresponse same instruction, but don’t work.
Thank’s for all.
The parameter
autoresponder_destination_recipient_limitisn’t a postfix parameter, but because you entered this line:o content_filter=autoresponder:dummyin your master.cf file, postfix will recognize the parameter. Check out this link and then after you’ve verified that you’ve set everything up correctly, install and configure autoresponse as per the instructions here or here. Thanks for using autoresponse, let me know if I can help you with anything else!An information.. Minimum postfix version? I have version 2.3.8-1 on Fedora Core5. I can’t find parameter
“autoresponder_destination_recipient_limit”.. In ending, nothing work.. and i blocking mail reciving.. Can you help me? Bye!